Danville Wholesale Paper - Spray Buffing Or Burnishing

[ Washroom Cleaning ] [ Deadly Sins of Washroom Cleaning ]
[ Floor Care - Dry and Wet Cleaning ]
[ Floor Scrubbing ] [ Floor Stripping ] [ Floor Finishing ]
[ Back to Tips Page ]

Spray Buffing or Burnishing

Procedures for Spray Buffing:

Always clean the floor first.

Use proper color pad.
Make sure pad is clean.

Spray lightly on floor.

Buff floor to a high shine.

Flip or change pad when dirty.

Properly clean and store
equipment.

Procedures for Burnishing:

Always clean the floor first.

Use proper color pad.
Make sure pad is clean.

Burnish floor to a high shine.

Flip or change pad when dirty.

Properly clean and store
equipment.

Recommended Products: Over Drive for spray buffing, Speedtrack for burnishing.
Note: Speedtrack can be applied with a mop or a auto scrubber.
Mop floor with a neutral floor cleaner like Sundance.
Use a red or white pad for spray buffing, a good quality hi-speed pad for burnishing.
Chemicals by Butchers.

Recommended Equipment: For buffing: Low speed floor machine (175-300 rpm). For burnishing: electric floor burnisher (1000-2000 rpm), Battery operated floor burnisher or a propane burnisher. Mop bucket and wringer, low speed or high burnisher pads, mop handle, and mop heads.

Goofs and Consequences